======ZTE Testlab(NJ)======

ZTE is hosting an OPNFV testlab at Nanjing facility. The testlab would host baremetal servers for the use of OPNFV community as part of the OPNFV Pharos Project.

The ZTE Testlab consists of 1 POD

  *  POD for Fuel,Already be installed with Aron release.


====Testlab Introduction====

The ZTE testlab(NJ) will provide the following facilities for OPNFV intergration and testing.OPNFV contributor or committer can create the VM to run the yardstick test case on openstack or run the OPNFV functest case on the jumperserver.

we will connect the lab to OPNFV CI as test function slave node. 

====Testlab environment====

The ZTE testlab(NJ) testlab will follow the testlab environment requirement of PHROS project and BGS project.

{{ pharos:zte-opnfv-testlab-nj.jpg?direct |}}

====Testbed description====

 The POD consists of 8 servers that consist of
  * 3 Servers for Control Nodes
  * 3 Servers for Compute Nodes
  * 2 Servers for Cinder

== Hardware details ==


The specifications for the servers within POD can be found below:

^ Hostname ^ Model  ^  Memory    ^ Storage     ^ Processor ^Socket  ^  
|Fuel Jump Server     |  ZTE 4300           | 32 GB          |600GB HDD     |Intel  Xeon E5-2680  |   2        |
|Node*8               |  E9000              | 128 GB         |600GB HDD     |Intel  Xeon E5-2680  |   2        |

== Software ==

The Jump servers in the Testlab are pre-provisioned with the following software:

  * Fuel Jump Server:
      - OS: CentOS7
      - Preprovisoned softwares: KVM, VNC server
      - fuel on kvm

The Node on ZTE E9000 are installed with Arno release:

  * Node*8: Openstack  

== Networks ==

Subnet allocations

^ Network name      ^ Address        ^ Mask              ^ Gateway       ^ VLAN id  ^
| Public            |172.10.0.0      |  255.255.255.0    | 172.10.0.1    | Untagged | 
|Fuel Admin         |192.168.0.0     |  255.255.255.0    | 192.168.0.1   | Untagged |
|Fuel Mangement     |192.168.11.0    |  255.255.255.0    |               | 101      |
|Fuel Storage       |192.168.12.0    |  255.255.255.0    |               | 102      |

====Testlab Access====

This environment is free to be used by any OPNFV contributor or committer for the purpose of OPNFV approved activities. We could provide the SSH access for you, and access to this environment can be granted by sending an e-mail to:

<wu.zhihui1@zte.com.cn>

subject: opnfv_zte_access.

The following information should be provided in the request:

  * Full name:
  * E-mail:
  * Organization:
  * Source IP:
  * Resources required:
  * Uses:

First access the jumpserver with your key,then you can access fuel and other nodes from jumpserver.

^ Hostname       ^ Lights-out address            ^ MAC              ^Username             ^ Password            ^
|Jumpserver      | 210.51.195.56:5902(ssh)       |90:e2:ba:8b:08:65 |     opnfv           |                     |                   |
|Node4           | 192.168.0.7                   |06:9d:69:13:5f:45 |     opnfv           |                     |
|Node5           | 192.168.0.8                   |32:9b:c4:da:10:4c |     opnfv           |                     |
|Node6           | 192.168.0.6                   |46:18:c4:74:cf:40 |     opnfv           |                     |
|Node10          | 192.168.0.4                   |be:d0:49:d4:06:42 |     opnfv           |                     |
|Node11          | 192.168.0.3                   |a2:d5:c1:bb:2b:49 |     opnfv           |                     |
|Node12          | 192.168.0.2                   |62:08:00:cd:4c:43 |     opnfv           |                     |
|Node13          | 192.168.0.9                   |4c:09:b4:b2:59:87 |     opnfv           |                     |
|Node14          | 192.168.0.10                  |9a:90:8a:db:e1:4c |     opnfv           |                     |