Wiki

User Tools

Site Tools

Trace:
compass4nfv_deployment_guide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
compass4nfv_deployment_guide [2015/09/14 09:52]
shuai chen created 		compass4nfv_deployment_guide [2016/03/04 07:10] (current)
mei mei
Line 1: Line 1:
 ======Compass4nfv deployment guide====== ======Compass4nfv deployment guide======
  
-=====Prerequisite===== +please pay attention to our latest release: 
- +[[https://www.opnfv.org/opnfv-brahmaputra-compass-users|opnfv-brahmaputra-compass-users]]
-1. One jumpserver installed with Ubuntu14.04. +
- +
- +
-2. If baremetal is target installed environment,​ the jumpserver needs 3 physical ethernet ports, 2 ports(for Managerment/​Installation,​ IPMI) connect with baremetals, 1 ports connects with externel network. Baremetal neets to be same. +
- +
- +
-3. Pre-allocate IP addresses for baremetals, and get accounts and passwords of BMC on baremetals. +
- +
- +
-4. If virtual machine is target installed environment,​ the jumpserver also needs 100G storage and 16G RAM. +
- +
- +
-5. Gerrit: git clone https://​gerrit.opnfv.org/​gerrit/​compass4nfv +
- +
- +
-6. Please don't git clone compass4nfv in the root directory. +
- +
-   +
- +
-__**Attention:​**__  +
- +
-Compass4nfv does stick on the OPNFV communities'​ Operating System version requirement.  +
- +
-For Brahmputra, Ubuntu14.04 or newer and Centos7.0 or newer are requested, so the target installed environment will be installed on Ubuntu14.04 or Centos7.0. +
- +
- +
- +
-   +
-=====How to build a ISO===== +
- +
-If you want to use official ISO to deploy Compass4nfv,​ you can jump over this section.  +
- +
- +
-This section indicates how to add new packages into the compass4nfv iso file and Compass4nfv would install the packages automatically during the deployment. +
- +
- +
-===Approach 1 ----- apt/yum installation=== +
- +
- +
-1. Confirm the targeted packages could be installed via apt-get(Ubuntu) and yum(Centos),​ you can verify on your own environment first by commands "​apt-get install {targeted packages}"​ on Ubuntu and "yum install {targeted packages}"​ on Centos. +
- +
- +
-2. Create a new role folder ({newrole}) in the compass4nfv/​deploy/​adapters/​ansible/​roles/,​ create a new folder named "​vars"​ in the new role folder({newrole}),​ and create a file named "​main.yml"​. +
- +
- +
-3. If the targeted packages name are same in both Ubuntu and Centos, you just need edit main.yml.  +
- +
-the content: +
-<​code>​ +
---- +
-packages_noarch:​ +
-   - {targeted packages1} +
-   - {targeted packages2} +
-   - {targeted packages3} +
-   ... +
-</​code>​ +
- +
-4. If the targeted packages name are different, you need add "​Debian.yml"​ and "​RedHat.yml"​ in the same folder as "​main.yml"​.  +
- +
-The content in "​Debian.yml"​ and "​RedHat.yml"​ : +
-<​code>​ +
---- +
-packages: +
-   - {targeted Ubuntu/​RedHat ​ packages1} +
-   - {targeted Ubuntu/​RedHat ​ packages2} +
-   - {targeted Ubuntu/​RedHat ​ packages3} +
-   ... +
-</​code>​ +
- +
-Also you can refer compass4nfv/​deploy/​adapters/​ansible/​roles/​glance/​vars as example. +
- +
- +
-5.1 Add the new role: enter compass4nfv/​deploy/​adapters/​ansible/​openstack_juno/​ and edit HA-ansible-multinodes.yml and/or single-controller.yml,​ add {newrole} at the position as you want, please ​be aware of that compass4nfv deploys the roles in the order as mentioned in HA-ansible-multinodes.yml/​single-controller.yml,​ you can add a new section as the following:​ +
- +
-<​code>​ +
-- hosts: all/​controller/​compute/​ha +
-  remote_user:​ root +
-  sudo: True +
-  roles: +
-    - {newrole} +
-</​code>​ +
- +
- +
-The first line "​hosts"​ of the section means compass4nfv will deploy {newrole} on which baremetals/​VMs,​ "​all"​ means it deploys on all baremetals/​VMs,​ "​controller"​ means it deploys on all controller and so on. +
-     +
-Also you can refer "​glance"​ position in HA-ansible-multinodes.yml and single-controller.yml. +
- +
- +
-__**Attention:​**__ +
- +
-"​HA-ansible-multinodes.yml"​ deploys controllers backup targeted environment and 3 controllers in backup mode + 2 compute by default;  +
-"​single-controller.yml"​ deploys 1 controller + 4 compute. +
- +
- +
-5.2 Or insert the new role into the existing section in HA-ansible-multinodes.yml and single-controller.yml. +
- +
-Example: +
-<​code>​ +
-- hosts: controller/​all/​compute/​ha +
-  remote_user:​ root +
-  sudo: True +
-  roles: +
-    - database +
-    - mq +
-    - keystone +
-    - nova-controller +
-    - neutron-controller +
-    - {newrole} +
-</​code>​ +
- +
-Please ​pay attention to the first line "​hosts"​ by which Compass4nfv deploys {newrole} on which baremetals/​VMs. +
-Also please pay attention to the position inserted as Compass4nfv deploys the packages in the order. +
- +
-Also you can refer "​glance"​ position as example in HA-ansible-multinodes.yml and single-controller.yml. +
- +
- +
-6. Run compass4nfv/​build/​make_repo.sh +
- +
- +
-7. After 6 finishs, please check , if files exist, that means building packages success. +
- +
-8. Edit compass4nfv/​build/​build.conf,​ find CENTOS7_JUNO_PPA and TRUSTY_JUNO_PPA items, modify these 2 items as local paths(if you just want deploy with one operating system, you just modify one item), CENTOS7_JUNO_PPA is packages path for Centos, so CENTOS7_JUNO_PPA = , and TRUSTY_JUNO_PPA packages path for Ubuntu, so TRUSTY_JUNO_PPA = . +
- +
-9. Run compass4nfv/​build.sh to build a new ISO, after finished, there is a new ISO file in the . +
- +
- +
-===Approach 2 ---- source installation=== +
- +
-This section indicates to install packages from source codes. If the installing packages could not be installed from apt-get and yum but from source codes, please refer this section. +
- +
-1. Enter compass4nfv/​build/​arch/​Debian or compass4nfv/​build/​arch/​RedHat depend on which operating system you want to install package, create a bash(.sh) file which includes all the commands which install the packages from source codes. +
- +
-Example: +
-<​code>​ +
-    #​!/​bin/​bash +
-    apt-get update +
-    apt-get install -y build-essential fakeroot debhelper \ +
-             ​autoconf automake bzip2 libssl-dev \ +
-             ​openssl graphviz python-all procps \ +
-             ​python-qt4 python-zopeinterface \ +
-             ​python-twisted-conch libtool wget +
-    pushd . +
-    cd /tmp +
-    wget http://openvswitch.org/releases/​openvswitch-2.3.1.tar.gz +
-    tar -zxvf openvswitch-2.3.1.tar.gz +
-    cd openvswitch-2.3.1 +
-    DEB_BUILD_OPTIONS='​parallel=8 nocheck'​ fakeroot debian/​rules binary +
-    cd - +
-    cp -f *.deb /​var/​cache/​apt/​archives/​ +
-    popd +
-</​code>​ +
- +
-Please pay attention to the last second sentence, all the compiled packages need to be copied to the "/​var/​cache/​apt/​archives/"​(Ubuntu) folder, and for Centos, the folder is ... to be continued . +
- +
- +
-2. Run compass4nfv/​build/​make_repo.sh +
- +
-3. After 2 finishs, please check , if files exist, that means building packages success. +
- +
-4. Edit compass4nfv/​build/​build.conf,​ find CENTOS7_JUNO_PPA and TRUSTY_JUNO_PPA items, modify these 2 items as local paths(if you just want deploy with one operating system, you just modify one item), CENTOS7_JUNO_PPA is packages path for Centos, so CENTOS7_JUNO_PPA = , and TRUSTY_JUNO_PPA packages path for Ubuntu, so TRUSTY_JUNO_PPA = . +
- +
-5. Run compass4nfv/​build.sh to build a new ISO, after finished, there is a new ISO file in the . +
- +
- +
- +
-===Approach 3 ---- autonomous packages installation=== +
- +
-package installed, to be continued... +
- +
- +
-=====How to deploy baremetal and VMs===== +
- +
-===Deploy baremetal in HA mode:=== +
- +
-1. Edit compass4nfv/​deploy/​conf/​baremetal_cluster_general.yml,​ to be continued... +
- +
-2. Edit compass4nfv/​deploy/​conf/​base.conf,​ modify the item "​export OM_NIC=${OM_NIC:​-eth3}"​ as the install network ethernet port based your jumpserver. +
- +
-3. Run compass4nfv/​deploy.sh baremetal_cluster_general +
- +
- +
- +
- +
-===Deploy baremetal in Single mode:=== +
- +
-1. Edit compass4nfv/​deploy/​conf/​baremetal_five.yml , change items [name, mac, ipmiUser, ipmiPass, ipmiIp, roles] based on the baremetal to be deployed. +
- +
-2. Edit compass4nfv/​deploy/​conf/​base.conf,​ modify the item "​export OM_NIC=${OM_NIC:​-eth3}"​ as the install network ethernet port based your jumpserver. +
- +
-3. Run compass4nfv/​deploy.sh baremetal_five +
- +
- +
- +
- +
-===Deploy VMs in HA mode:=== +
- +
-1.(Optional) Edit compass4nfv/​deploy/​conf/​virtual_cluster.yml,​ change items [name, roles] as you want, also you could reduce or add hosts sections as you want. And 3 controller in HA mode and 2 compute will be deployed without changing this yml file. +
- +
-2. Run compass4nfv/​deploy.sh virtual_cluster ​ or  Run compass4nfv/​deploy.sh . +
- +
- +
- +
- +
-===Deploy baremetal in Single mode:=== +
- +
-1.(Optional) Edit compass4nfv/​deploy/​conf/​virtual_five.yml,​ change items [name, roles] as you want, also you could reduce or add hosts sections as you want. And 3 controller in HA mode and 2 compute will be deployed without changing this yml file. +
- +
-2. Run compass4nfv/​deploy.sh virtual_five . +
- +
- +
-__**Attention:​**__ +
- +
-Roles here includes controller compute network storage ha odl and onos. +
- +
- +
- +
-=====How to integration plugins===== +
-to be continued... +
- +
- +
- +
- +
-=====How to deploy without network access===== +
-to be continued... +
compass4nfv_deployment_guide.1442224353.txt.gz · Last modified: 2015/09/14 09:52 by shuai chen

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: Creative Commons Attribution 4.0 International License
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki