copper:academy:joid:congress
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
copper:academy:joid:congress [2016/02/08 18:30] Bryan Sullivan |
copper:academy:joid:congress [2016/02/25 01:22] (current) Bryan Sullivan |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | This is a temporary location for a Congress install guide that will be included in the Copper git repo. | ||
| - | |||
| Following are instructions for installing Congress on an Ubuntu 14.04 LXC container in the OPNFV Controller node, as installed by the JOID installer. This guide uses instructions from the [[http://congress.readthedocs.org/en/latest/readme.html#installing-congress|Congress guide on readthedocs]]. Specific values below will need to be modified if you intend to repeat this procedure in your install environment. | Following are instructions for installing Congress on an Ubuntu 14.04 LXC container in the OPNFV Controller node, as installed by the JOID installer. This guide uses instructions from the [[http://congress.readthedocs.org/en/latest/readme.html#installing-congress|Congress guide on readthedocs]]. Specific values below will need to be modified if you intend to repeat this procedure in your install environment. | ||
| Line 6: | Line 4: | ||
| OPFNV install per [[https://wiki.opnfv.org/copper/academy/joid|JOID]] | OPFNV install per [[https://wiki.opnfv.org/copper/academy/joid|JOID]] | ||
| - | == Install base VM for congress on controller node == | + | == Install Procedure == |
| - | <code> | + | |
| - | juju ssh ubuntu@node1-control | + | |
| - | </code> | + | |
| - | == Clone the container == | + | The install currently occurs via four bash scripts provided in the copper repo. See these files for the detailed steps: |
| - | <code> | + | * [[https://git.opnfv.org/cgit/copper/tree/components/congress/joid/install_congress_1.sh|install_congress_1.sh]]: creates the linux container for the congress server on the controller node, starts the congress server, copies install_congress_2.sh to the congress server and invokes it via ssh. |
| - | sudo lxc-clone -o juju-trusty-lxc-template -n juju-trusty-congress | + | * [[https://git.opnfv.org/cgit/copper/tree/components/congress/joid/install_congress_2.sh|install_congress_2.sh]]: installs congress in the congress server. |
| - | </code> | + | |
| - | + | ||
| - | == Start the container == | + | |
| - | <code> | + | |
| - | sudo lxc-start -n juju-trusty-congress -d | + | |
| - | </code> | + | |
| - | + | ||
| - | == Get the container IP address == | + | |
| - | <code> | + | |
| - | sudo lxc-info -n juju-trusty-congress | + | |
| - | </code> | + | |
| == If you need to start over == | == If you need to start over == | ||
| - | * Shutdown the congress server, and on the node1-control machine, delete the container | + | Shutdown the congress server, and on the node1-control machine, delete the container. |
| <code> | <code> | ||
| - | # on the congress server | + | # get the congress server address |
| - | sudo shutdown -P 0 | + | juju ssh ubuntu@node1-control |
| + | sudo lxc-info --name juju-trusty-congress | grep IP | awk "/ / { print \$2 }" | ||
| exit | exit | ||
| + | juju ssh ubuntu@<congress server address> | ||
| + | sudo shutdown -P 0; exit | ||
| juju ssh ubuntu@node1-control | juju ssh ubuntu@node1-control | ||
| sudo lxc-destroy --name juju-trusty-congress | sudo lxc-destroy --name juju-trusty-congress | ||
| - | </code> | ||
| - | |||
| - | == Exit from controller (back to jumphost) and login to congress container == | ||
| - | <code> | ||
| - | juju ssh ubuntu@192.168.10.117 | ||
| - | </code> | ||
| - | |||
| - | == Update package repos == | ||
| - | <code> | ||
| - | sudo apt-get update | ||
| - | </code> | ||
| - | |||
| - | == Setup environment variables == | ||
| - | <code> | ||
| - | export CONGRESS_HOST=192.168.10.106 | ||
| - | export KEYSTONE_HOST=192.168.10.119 | ||
| - | export CEILOMETER_HOST=192.168.10.116 | ||
| - | export CINDER_HOST=192.168.10.117 | ||
| - | export GLANCE_HOST=192.168.10.118 | ||
| - | export NEUTRON_HOST=192.168.10.125 | ||
| - | export NOVA_HOST=192.168.10.121 | ||
| - | </code> | ||
| - | |||
| - | == install pip == | ||
| - | <code> | ||
| - | sudo apt-get install python-pip -y | ||
| - | </code> | ||
| - | |||
| - | == install java == | ||
| - | <code> | ||
| - | sudo apt-get install default-jre -y | ||
| - | </code> | ||
| - | |||
| - | == install other dependencies == | ||
| - | <code> | ||
| - | # when prompted, set and remember mysql root user password | ||
| - | sudo apt-get install git gcc python-dev libxml2 libxslt1-dev libzip-dev mysql-server python-mysqldb -y | ||
| - | sudo pip install virtualenv | ||
| - | </code> | ||
| - | |||
| - | == clone congress == | ||
| - | <code> | ||
| - | git clone https://github.com/openstack/congress.git | ||
| - | cd congress | ||
| - | git checkout stable/liberty | ||
| - | </code> | ||
| - | |||
| - | == Create virtualenv == | ||
| - | <code> | ||
| - | virtualenv ~/congress | ||
| - | source bin/activate | ||
| - | </code> | ||
| - | |||
| - | == Setup Congress == | ||
| - | <code> | ||
| - | sudo mkdir -p /etc/congress | ||
| - | sudo mkdir -p /etc/congress/snapshot | ||
| - | sudo mkdir /var/log/congress | ||
| - | sudo chown ubuntu /var/log/congress | ||
| - | sudo cp etc/api-paste.ini /etc/congress | ||
| - | sudo cp etc/policy.json /etc/congress | ||
| - | </code> | ||
| - | |||
| - | == install requirements.txt and tox dependencies (detected by errors during "tox -egenconfig") == | ||
| - | <code> | ||
| - | sudo apt-get install libffi-dev -y | ||
| - | sudo apt-get install openssl -y | ||
| - | sudo apt-get install libssl-dev -y | ||
| - | </code> | ||
| - | |||
| - | == install dependencies in virtualenv == | ||
| - | <code> | ||
| - | pip install -r requirements.txt | ||
| - | python setup.py install | ||
| - | </code> | ||
| - | |||
| - | == install tox == | ||
| - | <code> | ||
| - | pip install tox | ||
| - | </code> | ||
| - | |||
| - | == generate congress.conf.sample == | ||
| - | <code> | ||
| - | tox -egenconfig | ||
| - | </code> | ||
| - | |||
| - | == edit congress.conf.sample as needed == | ||
| - | <code> | ||
| - | sed -i -- 's/#verbose = true/verbose = true/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#log_file = <None>/log_file = congress.log/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#log_dir = <None>/log_dir = \/var\/log\/congress/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#bind_host = 0.0.0.0/bind_host = 192.168.10.117/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#policy_path = <None>/policy_path = \/etc\/congress\/snapshot/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#auth_strategy = keystone/auth_strategy = noauth/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#drivers =/drivers = congress.datasources.neutronv2_driver.NeutronV2Driver,congress.datasources.glancev2_driver.GlanceV2Driver,congress.datasources.nova_driver.NovaDriver,congress.datasources.keystone_driver.KeystoneDriver,congress.datasources.ceilometer_driver.CeilometerDriver,congress.datasources.cinder_driver.CinderDriver/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#auth_host = 127.0.0.1/auth_host = 192.168.10.108/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#auth_port = 35357/auth_port = 35357/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#auth_protocol = https/auth_protocol = http/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#admin_tenant_name = admin/admin_tenant_name = admin/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#admin_user = <None>/admin_user = congress/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#admin_password = <None>/admin_password = congress/g' etc/congress.conf.sample | ||
| - | sed -i -- 's/#connection = <None>/connection = mysql:\/\/ubuntu:<mysql password>@localhost:3306\/congress/g' etc/congress.conf.sample | ||
| - | </code> | ||
| - | |||
| - | == copy congress.conf.sample to /etc/congress == | ||
| - | <code> | ||
| - | sudo cp etc/congress.conf.sample /etc/congress/congress.conf | ||
| - | </code> | ||
| - | |||
| - | == create congress database == | ||
| - | <code> | ||
| - | sudo mysql -u root -p | ||
| - | CREATE DATABASE congress; | ||
| - | GRANT ALL PRIVILEGES ON congress.* TO 'ubuntu'@'localhost' IDENTIFIED BY '<mysql password>'; | ||
| - | GRANT ALL PRIVILEGES ON congress.* TO 'ubuntu'@'%' IDENTIFIED BY '<mysql password>'; | ||
| - | exit | ||
| - | </code> | ||
| - | |||
| - | == install congress-db-manage dependencies (detected by errors) == | ||
| - | <code> | ||
| - | sudo apt-get build-dep python-mysqldb -y | ||
| - | pip install MySQL-python | ||
| - | </code> | ||
| - | |||
| - | == create database schema == | ||
| - | <code> | ||
| - | congress-db-manage --config-file /etc/congress/congress.conf upgrade head | ||
| - | </code> | ||
| - | |||
| - | == Dependencies of OpenStack, Congress, Keystone related client operations == | ||
| - | <code> | ||
| - | pip install python-openstackclient | ||
| - | pip install python-congressclient | ||
| - | pip install python-keystoneclient | ||
| - | </code> | ||
| - | |||
| - | == download admin-openrc.sh from Horizon and save in ~ == | ||
| - | <code> | ||
| - | source ~/admin-openrc.sh | ||
| - | </code> | ||
| - | |||
| - | == setup Congress user. TODO: needs update in http://congress.readthedocs.org/en/latest/readme.html#installing-congress == | ||
| - | <code> | ||
| - | pip install cliff --upgrade | ||
| - | export ADMIN_ROLE=$(openstack role list | awk "/ Admin / { print \$2 }") | ||
| - | export SERVICE_TENANT=$(openstack project list | awk "/ admin / { print \$2 }") | ||
| - | openstack user create --password congress --project admin --email "congress@example.com" congress | ||
| - | export CONGRESS_USER=$(openstack user list | awk "/ congress / { print \$2 }") | ||
| - | openstack role add $ADMIN_ROLE --user $CONGRESS_USER --project $SERVICE_TENANT | ||
| - | </code> | ||
| - | |||
| - | == Create Congress service == | ||
| - | <code> | ||
| - | openstack service create congress --type "policy" --description "Congress Service" | ||
| - | export CONGRESS_SERVICE=$(openstack service list | awk "/ congress / { print \$2 }") | ||
| - | </code> | ||
| - | |||
| - | == Create Congress endpoint == | ||
| - | <code> | ||
| - | openstack endpoint create $CONGRESS_SERVICE \ | ||
| - | --region $OS_REGION_NAME \ | ||
| - | --publicurl http://$CONGRESS_HOST:1789/ \ | ||
| - | --adminurl http://$CONGRESS_HOST:1789/ \ | ||
| - | --internalurl http://$CONGRESS_HOST:1789/ | ||
| - | </code> | ||
| - | |||
| - | == Start the Congress service in the background == | ||
| - | <code> | ||
| - | bin/congress-server & | ||
| - | # disown the process (so it keeps running if you get disconnected) | ||
| - | disown -h %1 | ||
| - | </code> | ||
| - | |||
| - | == Create data sources == | ||
| - | To remove datasources: openstack congress datasource delete <name> | ||
| - | Probably good to do these commands in a new terminal tab, as the congress server log from the last command will be flooding your original terminal screen... | ||
| - | <code> | ||
| - | openstack congress datasource create nova "nova" \ | ||
| - | --config username=$OS_USERNAME \ | ||
| - | --config tenant_name=$OS_TENANT_NAME \ | ||
| - | --config password=$OS_PASSWORD \ | ||
| - | --config auth_url=http://$KEYSTONE_HOST:5000/v2.0 | ||
| - | openstack congress datasource create neutronv2 "neutronv2" \ | ||
| - | --config username=$OS_USERNAME \ | ||
| - | --config tenant_name=$OS_TENANT_NAME \ | ||
| - | --config password=$OS_PASSWORD \ | ||
| - | --config auth_url=http://$KEYSTONE_HOST:5000/v2.0 | ||
| - | openstack congress datasource create ceilometer "ceilometer" \ | ||
| - | --config username=$OS_USERNAME \ | ||
| - | --config tenant_name=$OS_TENANT_NAME \ | ||
| - | --config password=$OS_PASSWORD \ | ||
| - | --config auth_url=http://$KEYSTONE_HOST:5000/v2.0 | ||
| - | openstack congress datasource create cinder "cinder" \ | ||
| - | --config username=$OS_USERNAME \ | ||
| - | --config tenant_name=$OS_TENANT_NAME \ | ||
| - | --config password=$OS_PASSWORD \ | ||
| - | --config auth_url=http://$KEYSTONE_HOST:5000/v2.0 | ||
| - | openstack congress datasource create glancev2 "glancev2" \ | ||
| - | --config username=$OS_USERNAME \ | ||
| - | --config tenant_name=$OS_TENANT_NAME \ | ||
| - | --config password=$OS_PASSWORD \ | ||
| - | --config auth_url=http://$KEYSTONE_HOST:5000/v2.0 | ||
| - | openstack congress datasource create keystone "keystone" \ | ||
| - | --config username=$OS_USERNAME \ | ||
| - | --config tenant_name=$OS_TENANT_NAME \ | ||
| - | --config password=$OS_PASSWORD \ | ||
| - | --config auth_url=http://$KEYSTONE_HOST:5000/v2.0 | ||
| - | </code> | ||
| - | |||
| - | == Run Congress Tempest Tests === | ||
| - | <code> | ||
| - | tox -epy27 | ||
| </code> | </code> | ||
| Line 253: | Line 28: | ||
| <code> | <code> | ||
| # On jumphost, SSH to Congress server | # On jumphost, SSH to Congress server | ||
| - | juju ssh ubuntu@192.168.10.117 | + | juju ssh ubuntu@<congress server address> |
| # If that fails | # If that fails | ||
| # On jumphost, SSH to controller node | # On jumphost, SSH to controller node | ||
| - | juju ssh ubuntu@192.168.10.119 | + | juju ssh ubuntu@node1-control |
| # Start the Congress container | # Start the Congress container | ||
| sudo lxc-start -n juju-trusty-congress -d | sudo lxc-start -n juju-trusty-congress -d | ||
| Line 267: | Line 42: | ||
| # On the Congress server that you have logged into | # On the Congress server that you have logged into | ||
| source ~/admin-openrc.sh | source ~/admin-openrc.sh | ||
| - | cd congress | + | cd ~/git/congress |
| source bin/activate | source bin/activate | ||
| bin/congress-server & | bin/congress-server & | ||
| disown -h %1 | disown -h %1 | ||
| </code> | </code> | ||
copper/academy/joid/congress.1454956233.txt.gz · Last modified: 2016/02/08 18:30 by Bryan Sullivan
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: Creative Commons Attribution 4.0 International License
