Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== OPNFV Platform Cold System Install ======
The following table provides the OPNFV Platform cold system install test suites and cases.

^Test Id    ^Title  ^Type   ^Description/Procedure   ^Pass/Fail Criteria   ^Target Release   ^Automation Required   ^
|F-001-001  |Installer Setup  |Test  |Boot up the install server or VM and verify connectivity to control network, Management network and switches. Download OPNFV release software. Start the OPNFV installer setup  |Test script should run to completion, downloading all necessary packages required and indicate Pass  |R1.0  |Yes  |
|F-001-002  |PXE Boot of servers  |Test  |Configure the installer required configuration to identify the servers in the system. Provide the MAC address range and the IP address range for control network, Mgmt Network etc. Start the Installer script to launch the system install.  The installer verifies the configuration and PXE boots all servers and makes it ready for the OPNFV upstream software package installation.  |1. All system services are up and running on all nodes. 2. Node connectivity testing, v4 ping, v6 ping of all nodes pass. 3. Necessary admin users are created on all nodes. 4. ssh connectivity works on all nodes and the configured public keys are installed. 5. System logs on all nodes indicate successful installation, no critical errors. 6. KVM is installed properly on all computes.  |R1.0  |Yes  |
|F-001-003  |Basic Services Install  |Test  |Proceed with the second phase of installer to setup the basic services required. The Basic services include NTP, Puppet/Juju/XXXX, MySQL, CEPH, OpenVSwitch etc. |1. Verify clocks are synchronized on all nodes. 2. Verify MySql Server is up and running. 3. Verify Rabbit MQ is installed and operating correctly. 4. Verify CEPH OSDs are operational. 5. Verify CEPH MON services are running. 6. Verify the CEPH clusters are foremed correctly. 7. Verify OVSDB is up on relevant nodes.|R1.0   |Yes  |
|F-001-004  |Openstack release Install |Test  |Process with the next phase of the installer to setup openstack. Configure the nodes appropriately to identify the controller nodes (HA), compute nodes.  |1. Verify keystone services are up and running. 2. Verify nova-manage service list returns all nodes in the system with smiley face. 3. Verify Cinder-manage volume list. 4. Verify Heat is installed correctly, heat status. 5. Verify Horizon is installed properly. Able to login into Horizon from the installer node and the admin users are created. 6. Note that neutron services may not be up as the ODL controller setup is required for it to work properly.  |R1.0  |Yes  |
|F-001-005  |ODL Install  |Proceed with the next phase of the install to setup ODL. Identify the ODL services and nodes required. Configure the MD-SAL and relevant plugins (more detail required).  |Verify ODL is operational  |R1.0  |Yes  |
Wiki

User Tools

Site Tools

Page Tools
