get_started:networkingblueprint
This is an old revision of the document!
Network addressing and topology blueprint
This is a proposal for a redundant network environment connected to the OPNFV POD
with 2 L3 switches
having configured with VLANs for:
- control
- storage
- traffic
| Name | VLAN tag | network address | description |
|---|---|---|---|
| Control | |||
| cee_ctrl_sp | 2 | 192.168.2.0/25 | addresses for Fuel, ComputeHosts, Controllers |
| fuel_ctrl_sp | untagged | 192.168.0.0/24 | used for PXE booting the Controllers and ComputerHosts |
| pod_sw_ctrl_isc | 4 | 192.168.4.0/30 | vlan for isc between traffic switches |
| stor_sw_ctrl_isc | 5 | 192.168.5.0/30 | vlan for isc between storage switches |
| sw_ctrl_vip | 6 | 192.168.6.1-6/32 | management address for traffic and storage switches |
| subrack_ctrl_sp | 3 | 10.0.3.0/25 | used for subrack management to monitor and manage the server blades Dell(IDRAC), HP (VCFlex,ILO) |
| Storage | |||
| iscsi_san_pda | 11 | 192.168.11.0/25 | (iscsi-left) used for iSCSI Multipathing, connects iSCSI interface to EMC |
| iscsi_san_pdb | 12 | 192.168.12.0/25 | (iscsi-right) used for iSCSI Multipathing, connects iSCSI interface to EMC |
| migration_san_sp | 14 | 192.168.14.0/25 | used for live migration |
get_started/networkingblueprint.1426685819.txt.gz · Last modified: 2015/03/18 13:36 by Szilard Cserey
Except where otherwise noted, content on this wiki is licensed under the following license: Creative Commons Attribution 4.0 International License
