Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== ***NOTICE*** ======
**POD 3 is now used for vsperf CI support, it runs the daily jobs and commit gate validation. As such __IT IS NOT RECOMMENDED TO USE POD 3 AS A SANDBOX AT THIS TIME__. Efforts are being undertaken to setup another sandbox environment for VSPERF. Feel free to follow the example connections and configurations shown below in your own environment.**

====== Overview ======
Testbed **POD3** is available for OPNFV community to test and develop vswitchperf. In general, the testing environment consists of an IXIA traffic generator and linux machine (referred to as DUT) dedicated for vswitchperf test suite and its dependencies.

The testbed can be accessed over OpenVPN connection, after required certificates are assigned and delivered to interested //OPNFV member//. See below for contact details.

There are multiple machines at POD3 setup, but for vswitchperf testing the following two are important:


^ Server role                  ^ IP        ^ Server OS       ^ Access credentials                                                        ^ Access method                                                                ^
| DUT/testbed                  | 10.4.2.1  | Linux Centos7   | user/user                                                                 | ssh, e.g. <code>ssh user@10.4.2.1</code>                                     |
| Traffic Gen Windows Client          | 10.4.2.0  | Windows 8 (VM)  | administrator/P@ssw0rd                                                    | rdesktop, e.g. <code>rdesktop -u administrator -g 1024x1024 10.4.2.0</code>  |
| Traffic Gen Server/testbed2  | 10.4.2.4  | Linux Centos7   | non-root account with sudo privileges. Username: opnfv Password: octopus  | ssh, e.g. <code>ssh opnfv@10.4.2.4</code>                                    |






**Please check** [[get_started:intel_hosting]] **page for details about OpenVPN setup and POD3 testbed details.** **In case you need credentials for OpenVPN access to POD3, contact Jack Morgan** <Jack Morgan@intel.com>

====== POD 3 Booking Calendar ======
To use POD 3 please reserve a slot in the calendar @ https://wiki.opnfv.org/wiki/pod3_booking_calendar

====== POD3 Network Info ======
https://wiki.opnfv.org/get_started/pod_3_-_network

====== NIC connections ======

Testbed2 NIC (Traffic Gen Server) --> connected to --> Testbed NIC (DUT)

ens513f0: ether 00:1e:67:e2:67:e0 --> connected to --> eno1: ether 90:e2:ba:4a:7f:b0 
 
ens513f1: ether 00:1e:67:e2:67:e1 --> connected to --> ens2f1: ether 90:e2:ba:4a:7f:b1
====== Usage ======
==== Ixia on Traffic Gen Windows Client ====
It is essential, that IxNetwork TCL server is up and running (at port 9111) at Traffic Gen Windows Client machine 10.4.2.0. Otherwise vswitchperf won't be able to initiate traffic generation and tests will fail. So before testing itself, following steps must be performed:
  - login to the machine with remote desktop, e.g. <code>rdesktop -u administrator -g 1024x1024 10.4.2.0</code>
  - check if IxNetwork is running - if so, there will be an **Nw** icon in the system tray
  - if IxNetwork is running then proceed to DUT section below otherwise run IxNetwork by **Nw** icon at desktop or launch bar

IxNetwork has multiple functions. Previously mentioned TCL server is used as interface between DUT and IXIA generator. However IxNetwork also provides GUI, which shows progress of executed test, number of involved IXIA ports, etc. There is also a data miner application for inspection of test results. These results are stored in folder /temp/ixia/rfctests, which is shared with DUT over samba protocol, so vswitchperf can access and process them.

==== DUT ====
It is a Linux server where vswitchperf, vSwitch and NVF are installed. Testing itself is driven by vsperf script, which will configure chosen packet generator, vSwitch and NVF implementations, performs a test and finally collects test results.

=== vswitchperf usage ===
Once IxNetwork TCL server is running, vswithcperf can be used together with IXIA traffic generator. Following steps should be followed to run vsperf test script:

  - login to linux testbed, e.g. <code>ssh user@10.4.1.2</code>
  - in case, that you'll see a message that machine is booked, then please contact current user and check when machine will be free; Example of "booked" message: <code>
  !!! Machine is currently booked by: !!!
  john.smith@opnfv.org</code> Note: if there isn't any booked by message, it is still advised to check **who** and **ps ax** commands to avoid parallel vsperf invocation
  - make a note, that machine is booked, i.e. store your email to ''~/booked'' file, e.g. <code>echo "john.smith@opnfv.org" > ~/booked</code>
  - enable python33 environment <code>
  scl enable python33 bash</code>
  - enable vsperf virtual environment <code>
  source ~/vsperfenv/bin/activate</code>
  - enter vswitchperf directory and check, that vsperf works <code>
  cd ~/vswitchperf/
  ./vsperf --help</code>
  - in case, that vsperf works (usage has been shown), you could start with your testing, e.g. following command will run all available vsperf tests:<code>
  ./vsperf</code>
  - at the end of your session remove you booking note: <code>
  rm ~/booked</code>
  
=== vsperf manual termination ===
Procedure for manual termination of vsperf is following:
  - interrupt vsperf script from console by pressing **ctrl+c**
  - terminate all involved processes, e.g. in case of test with OpenVSwitch and QEMU you can do it by <code>
  sudo pkill python; sudo pkill ovs-vswitchd;sudo pkill -f qemu;sudo pkill ovsdb-server</code> **Hint:** There is ''~/bin/vskill'' script, which runs kill commands listed above, so you could simply run: <code>
  vskill</code>


==== Running tests ====
Start by carrying out the steps specified in "vswitchperf usage".

=== Phy2Phy ===
Customize vsperf configuration to match your system:<code>
vim ./conf/10_custom.conf</code> Example of working POD3 configuration:<code>
    # Copyright 2015 Intel Corporation.
    #
    # Licensed under the Apache License, Version 2.0 (the "License");
    # you may not use this file except in compliance with the License.
    # You may obtain a copy of the License at
    #
    #   http://www.apache.org/licenses/LICENSE-2.0
    #
    # Unless required by applicable law or agreed to in writing, software
    # distributed under the License is distributed on an "AS IS" BASIS,
    # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    # See the License for the specific language governing permissions and
    # limitations under the License.
    
    # traffic generator to use in tests
    RTE_SDK = '/home/user/vswitchperf/src/dpdk/dpdk'    # full path to DPDK src dir
    OVS_DIR = '/home/user/vswitchperf/src/ovs/ovs'    # full path to Open vSwitch src dir
    RTE_TARGET = 'x86_64-ivshmem-linuxapp-gcc' # the relevant DPDK build target
    
    # traffic generator to use in tests
    #TRAFFICGEN = 'Dummy'
    TRAFFICGEN = 'IxNet'
    #TRAFFICGEN = 'Ixia'
    
    # Ixia/IxNet configuration
    TRAFFICGEN_IXIA_CARD = '1'
    TRAFFICGEN_IXIA_PORT1 = '2'
    TRAFFICGEN_IXIA_PORT2 = '1'
    TRAFFICGEN_IXIA_LIB_PATH = '/opt/ixos/lib/ixTcl1.0'
    TRAFFICGEN_IXNET_LIB_PATH = '/opt/ixia/lib/IxTclNetwork'
    
    # Ixia traffic generator
    TRAFFICGEN_IXIA_HOST = '10.4.1.3'      # quad dotted ip address
    
    # host where IxNetwork GUI/daemon runs
    TRAFFICGEN_IXNET_MACHINE = '10.4.2.0'  # quad dotted ip address
    TRAFFICGEN_IXNET_PORT = '8009'
    TRAFFICGEN_IXNET_USER = 'administrator'
    
    WHITELIST_NICS = ['04:00.0', '04:00.1' ]
    
    # paths to shared directory for IXIA_HOST and DUT (localhost)
    TRAFFICGEN_IXNET_TESTER_RESULT_DIR = 'c:/temp/ixia'
    TRAFFICGEN_IXNET_DUT_RESULT_DIR = '/mnt/ixia'
    
    VSWITCH_VANILLA_PHY_PORT_NAMES = ['enp5s0f0', 'enp5s0f1']
    VANILLA_NIC1_NAME = ['eth1', 'eth3']
    VANILLA_NIC2_NAME = ['eth2', 'eth4']
    
    TEST_PARAMS = {'packet_sizes':'64'}</code>

Run the test:
 <code>./vsperf -t phy2phy_tput</code>

=== PVP ===

In addition to the P2P configuration above, customize vsperf configuration to match your system:<code>
vim ./conf/04_vnf.conf</code> Example of working POD3 configuration:<code>
# Copyright 2015 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# ############################
# VNF configuration
# ############################
VNF_DIR = 'vnfs/'
VNF = 'QemuDpdkVhost'

# ############################
# Guest configuration
# ############################

# directory which is shared to QEMU guests. Useful for exchanging files
# between host and guest
GUEST_SHARE_DIR = '/tmp/qemu_share'

# location of guest disk image
GUEST_IMAGE = '/home/user/ovdk_guest_release.qcow2'

# username for guest image
GUEST_USERNAME = 'root'

# password for guest image
GUEST_PASSWORD = 'root'

# login username prompt for guest image
GUEST_PROMPT_LOGIN = 'ovdk_guest login:'

# login password prompt for guest image
GUEST_PROMPT_PASSWORD = 'Password:'

# standard prompt for guest image
GUEST_PROMPT = 'root@ovdk_guest .*]#'

# log file for qemu
LOG_FILE_QEMU = 'qemu.log'

# log file for all commands executed on guest(s)
# multiple guests will result in log files with the guest number appended
LOG_FILE_GUEST_CMDS = 'guest-cmds.log'

# ############################
# Executables
# ############################
QEMU_BIN = '/home/user/vswitchperf/src/qemu/qemu/x86_64-softmmu/qemu-system-x86_64'

OVS_VAR_DIR = '/usr/local/var/run/openvswitch/'

GUEST_NET1_MAC = '00:00:00:00:00:01'
GUEST_NET2_MAC = '00:00:00:00:00:02'

GUEST_NET1_PCI_ADDRESS = '00:04.0'
GUEST_NET2_PCI_ADDRESS = '00:05.0'
</code>

Run the test:
 <code>./vsperf -t pvp_tput</code>
Wiki

User Tools

Site Tools

Page Tools
