ipv6_opnfv_project:ipv6_gap_odl
This is an old revision of the document!
IPv6 Gap Analysis with Open Daylight
Here is the gap analysis with Open Daylight: Work In Progress
| Use Case / Requirement | Supported in ODL Lithium SR1 Release? | Notes |
|---|---|---|
| API support for IPv6 subnet creation in ODL | Yes | Yes, it is possible to create IPv6 subnets in ODL. When we query the neutron port information it includes both IPv6 and/or IPv4 addresses. |
| IPv6 Router support in ODL | No | ODL Lithium SR1 release only supports IPv4 Router. Support for IPv6 Router is planned using Routing Manager as part of Beryllium Release. In the meantime, if IPv6 Routing is necessary, we can use ODL for L2 connectivity and Neutron L3 agent for IPv4/v6 routing. However, because of the following issue, we are unable to use this feature. Note: The issue seems to be fixed upstream and could be available in later releases of ODL. |
| IPAM: Support for IPv6 Address assignment modes. 1. SLAAC 2. DHCPv6 Stateless 3. DHCPv6 Stateful | No | Although it is possible to create different types of IPv6 subnets in ODL, ODL_L3 would have to implement the IPv6 Router that can send out Router Advertisements based on the IPv6 addressing mode. Router Advertisement is also necessary for VMs to configure the default route This could be part of Routing Manager in Beryllium release. |
| When using ODL for L2 forwarding/tunneling, is it compatible with IPv6. | Yes | |
| IPv6 support in Neutron Layer3 High Availability (keepalived+VRRP). | Yes |
ipv6_opnfv_project/ipv6_gap_odl.1444383307.txt.gz · Last modified: 2015/10/09 09:35 by Sridhar Gaddam
Except where otherwise noted, content on this wiki is licensed under the following license: Creative Commons Attribution 4.0 International License
