(Help us to improve this page)

Example POD architecture drawings:

Link to Gliffy source for above drawing: maas-poc-drawing.gliffy.zip

Get the joid code from gerritt

git clone https://gerrit.opnfv.org/gerrit/p/joid.git cd joid/ci

• Create a directory in maas/<company name>/<pod number>/ for example

mkdir maas/intel/pod7/

• copy files from pod5 to pod7

cp maas/intel/pod5/* maas/intel/pod7/*

4 files will get copied: deployment.yaml environments.yaml interfaces.host lxc-add-more-interfaces

This file has been used to configure your maas and bootstrap node in a VM. Comments in the file are self explanatory and we expect fill up the information according to match lab infrastructure information.

This file will be used to configure your network interfaces on the rest of the nodes deployed through MAAS. I would suggest to list interface you want to bring up after the deployment of the Operating System. JUJU will do that using this file.

This File will be used as network template to create the network in containers.\

In case your POD is official OPNFV POD check in your files to the JOID git repo.

This section will guide you how to deploy maas and bootstrap node in a VM on a bare metal host.

Make sure you have ubuntu 14.04 install and all bridges configured on bare metal host server as mentioned in deployment.yaml file above. Then follow the section below.

• In case "$2" please add another section:

'intelpod7' )

      cp maas/intel/pod7/deployment.yaml ./deployment.yaml
      ;;

• run the following command from ~/joid/ci directory

./02-maasdeploy.sh intelpod7

   
   Above command will take around 30-45 minutes depends upon your network connection to install MAAS on VM as per name mentioned in the deployment.yaml and configure the interfaces accordingly.  
* Above maas installation will crate the environments.yaml file in ~/joid/ci folder

This section will guide you how to configure joid to your environment to deploy OPNFV platform.

• Make sure you have environments.yaml in ~/joid/ci directory. If it does not exist then most likely you have not used the above method to deploy MAAS. In that case please copy the file manually.
• make sure all changes in bundle file ./odl/juju-deployer/ovs-odl-ha.yaml has the correct information. If no then i would request you to modify the ~/joid/ci/01-deploybundle.sh file to modify fot your lab.

'' 
  'intelpod7' )
      cp maas/intel/pod7/interfaces.host trusty/ubuntu-nodes-controller/network/interfaces.host
      cp maas/intel/pod7/lxc-add-more-interfaces trusty/ubuntu-nodes-controller/lxc/add-more-interfaces
      cp maas/intel/pod7/interfaces.host trusty/ubuntu-nodes-compute/network/interfaces.host
      cp maas/intel/pod7/lxc-add-more-interfaces trusty/ubuntu-nodes-compute/lxc/add-more-interfaces
      # As per your lab vip address list be deafult uses 10.4.1.11 - 10.4.1.20
      sed -i -- 's/10.4.1.1/10.4.1.2/g' ./bundles.yaml
      # choose the correct interface to use for data network
      sed -i -- 's/#os-data-network: 10.4.8.0\/21/os-data-network: 10.4.9.0\/24/g' ./bundles.yaml
      sed -i -- 's/#        "ext-port": "eth1"/#        "ext-port": "brPublic"/g' ./bundles.yaml
      ;;
''

Once you have modified the above sections then deploymeny will be very easy. Please do the following:

./deploy.sh -o kilo -s odl -t ha -l intelpod7

Above statement will deploy the openstack kilo with sdn odl in HA mode in intel lab pod7

If you wants to deploy the opencontrail then you need to replace the odl with opencontrail in the above command.