Differences

This shows you the differences between two versions of the page.

--- copper:academy [2015/09/29 23:14]
Bryan Sullivan created
+++ copper:academy [2016/03/02 01:00] (current)
Bryan Sullivan
@@ Line 6: / Line 6: @@
   * the mechanisms supported by the additional components for configuration policy management
   * use cases, demos, and techniques supporting the Copper scope
+=== Multi-Node Apex-based install on 3 bare metal nodes (non-HA) ===
+This is a work in progress. The target system is as described for JOID below.
+See [[https://wiki.opnfv.org/copper/academy/apex|Apex install procedure]] for the basic install.
+=== Multi-Node JOID-based install on 3 bare metal nodes (non-HA) ===
+As shown in the diagram below, an internet connection is assumed to be available. In some cases (e.g. hackfests etc) you may need to connect thru a wifi network. Because it may not be obvious how to do this with a fixed configuration, see [[https://wiki.opnfv.org/copper/academy/wifi|getting your POD connected to the internet via wifi]].
+See [[https://wiki.opnfv.org/copper/academy/joid|Joid install procedure]] for the basic install, and [[https://wiki.opnfv.org/copper/academy/joid/notes|additional notes]].
+See [[https://wiki.opnfv.org/copper/academy/joid/congress|Congress install procedure]] for installation of OpenStack Congress in an LXC container on the JOID-based controller node.
+See [[https://wiki.opnfv.org/copper/academy/congress/test|Congress test procedures]] for notes on testing Congress.
+The hardware used in this includes:
+  * 3 Intel NUC i7 (NUC5i7RYH), each with 16GB RAM, 1TB HDD, 250MB SSD
+    * The diagram below shows three NUCs used for a single non-HA "POD", i.e. jumphost, controller, and compute node hosts, with a single NIC on jumphost and compute nodes, two NICs on controller node (onboard ethernet, USB ethernet adapter)
+  * a router/gateway that isolates the OPNFV private network (single subnet) from the other LAN segments or the Internet, and any pesky DHCP servers that might be there
+    * the private network can use any subnet; 192.168.10.0/24 is used below and in the procedures linked above
+{{ :copper:copper_sandbox_joid.png?direct&500 |}}
+[[https://wiki.opnfv.org/_media/copper/academy_joid.pptx|(Link to Powerpoint source of the diagram above)]]
 === Multi-Node Foreman-based install on 3 bare metal nodes (non-HA) ===
-See [[https://wiki.opnfv.org/copper/academy/foreman|Foreman install procedure]], followed by [[https://wiki.opnfv.org/copper/academy/foreman/verify|install verification procedure]].
+See [[https://wiki.opnfv.org/copper/academy/foreman|Foreman install procedure]], [[https://wiki.opnfv.org/copper/academy/foreman/verify|install verification procedure]], and [[https://wiki.opnfv.org/copper/academy/foreman/notes|additional notes]].
+The hardware used in this includes:
+  * 3 Intel NUC i7 (NUC5i7RYH), each with 16GB RAM, 1TB HDD, 250MB SSD
+    * The diagram below shows three NUCs used for a single non-HA "POD", i.e. jumphost, controller, and compute node hosts.
+    * Note: the single ethernet port on the NUCs can be augmented thru USB-NIC adapters using the 4 USB ports
+  * a router/gateway that isolates the OPNFV private network (single subnet) from the other LAN segments or the Internet, and any pesky DHCP servers that might be there
+    * the private network can use any subnet; 192.168.1.0/24 is used below and in the procedures linked above
+{{ :copper:copper_sandbox_take_6.png?direct&500 |}}
+[[https://wiki.opnfv.org/_media/copper/copper_work_items/academy.pptx|(Link to Powerpoint source of the diagram above)]]
+=== Earlier efforts to build Academy ===
+For the record, you can review the (mostly failed) [[https://wiki.opnfv.org/copper/academy/previous|earlier attempts]] ...

Wiki

User Tools

Site Tools

Differences

Page Tools