Intel POD 9 has been assigned to StorPerf for final integration testing in Pharos.

You will need a GPG key (https://fedoraproject.org/wiki/Creating_GPG_Keys) in order to get access to the POD, so anyone interested in helping, please be sure to get set up with Pharos access.

StorPerf Pharos testing will use FUEL for its base installation and follow the directions in How to Install and Run StorPerf to set up.

First thing is to bring the Jump Host up to date:

yum udpate
yum install -y virt-install virt-viewer
reboot

Jump host pod9-urb-jump has Xauth installed and ssh X forwarding enabled. FUEL ISO is downloaded and a new VM is created using that.

XAuth Setup:

yum install xauth

Edit /etc/ssh/sshd_config to read:

X11Forwarding yes
X11UseLocalhost no

Restart sshd:

service sshd reload

Download FUEL (Replace as needed)

wget http://artifacts.opnfv.org/fuel/opnfv-2016-02-10_09-45-08.iso

Network Assignment:

As I am not planning on having the two compute nodes be publicly routable over the 10.2.117.0/24 subnet, I am seconding one of the IP addresses from pod9-wcp-node1: 10.2.117.143. This way we can access FUEL and the FUEL UI directly:

Inside FUEL master, the following interfaces will be used:

Public Subnet           IF0: 10.2.117.0/24
FUEL Admin (PXE) Subnet IF1: 10.9.1.0/24 

Set up network bridges:

cp -p /etc/sysconfig/network-scripts/ifcfg-{enp1s0f0,br0}
sed -i -e'/HWADDR/d' -e'/UUID/d' -e's/enp1s0f0/br0/' -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-br0
echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f0
echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f0
echo BRIDGE=br0 >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f0

cp -p /etc/sysconfig/network-scripts/ifcfg-{enp1s0f1,br1}
sed -i -e'/HWADDR/d' -e'/UUID/d' -e's/enp1s0f1/br1/' -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-br1
echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f1
echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f1
echo BRIDGE=br1 >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f1

cp -p /etc/sysconfig/network-scripts/ifcfg-{enp2s0f0,br2}
sed -i -e'/HWADDR/d' -e'/UUID/d' -e's/enp2s0f0/br2/' -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-br2
echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-enp2s0f0
echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-enp2s0f0
echo BRIDGE=br2 >> /etc/sysconfig/network-scripts/ifcfg-enp2s0f0

service network restart

Create fuel master:

/usr/bin/qemu-img create -f qcow2 -o preallocation=metadata /var/lib/libvirt/images/fuel-master.qcow2 200G
virt-install --name=fuel-master --ram=16384 --vcpus=8 --accelerate --disk path=/var/lib/libvirt/images/fuel-master.qcow2,format=qcow2,bus=virtio --cdrom opnfv-2016-02-10_09-45-08.iso --network bridge=br1,model=virtio --network bridge=br0,model=virtio --os-type=linux --os-variant=rhel6 --vnc

Note: The following must be done in the virt-viewer UI. Also, I cannot seem to assign a default GW to eth0, so I have to put the PXE network as eth0 and the public network as eth1.

Network setup:

eth0: 10.9.1.2       netmask 255.255.255.0   no gw
eth1: 10.2.117.143   netmask 255.255.255.0   gw 10.2.117.1

The Controller will sit on only two networks:

1. br1, the POD9 Admin / PXE Boot network
2. br2, the POD9 Private network. This is the one that will be shared with the compute nodes.

/usr/bin/qemu-img create -f qcow2 -o preallocation=metadata /var/lib/libvirt/images/controller.qcow2 200G
virt-install --pxe --name=controller --ram=16384 --vcpus=8 --accelerate --disk path=/var/lib/libvirt/images/controller.qcow2,format=qcow2,bus=virtio --network bridge=br1,model=virtio --network bridge=br2,model=virtio --os-type=linux --os-variant=rhel6 --vnc

Once booted, this should show up in the FUEL UI. Assign it the controller role.