Differences

This shows you the differences between two versions of the page.

--- vtc [2016/01/18 11:56]
Ana Cunha created
+++ vtc [2016/01/18 16:43] (current)
Vincenzo Riccobene
@@ Line 1: / Line 1: @@
-===== virtual Traffic Classifier in Yardstick  ======
+===== Virtual Traffic Classifier in Yardstick  ======
+Some of the test cases provided with Yardstick are based on the deployment and execution of a virtual Traffic Classifier (vTC) network function.
+For the execution of Test Cases 006, 007, 020 and 021 some hardware and configuration requirements are needed. This page describes these configuration requirements.
+==== Framework Hardware Dependencies ====
+In order to run the framework there are some hardware related dependencies for ApexLake.
+=== DPDK dependecy ===
+Yardstick and Apexlake need to be installed on the same physical node where DPDK-pktgen is installed.
+The installation of this component requires the physical node hosting the packet generator must have 2 physical Network Interface Cards (NICs) which are DPDK compatible.
+=== Switch configuration ===
+The 2 NICs will be connected to the switch where the OpenStack VM network is managed.
+The switch used must also support multicast traffic and IGMP snooping.
+The corresponding ports to which the cables are connected need to be configured as VLAN trunks
+using two of the VLAN IDs available for OpenStack Neutron.
+=== Montreal Testbed configuration ===
+A diagram of the configuration used in the Montreal Testbed is shown at the following link:
+{{::opnfv-traffic-classifier-lab-setup-rev4.pdf|Testbed Configuration setup}}
-   * Information about the vTC

Wiki

User Tools

Site Tools

Differences

Page Tools