f-001
This is an old revision of the document!
OPNFV Platform Cold System Install
The following table provides the OPNFV Platform cold system install test suites and cases.
| Test Id | Title | Type | Description/Procedure | Pass/Fail Criteria | Target Release | Automation Required |
|---|---|---|---|---|---|---|
| F-001-001 | Installer Setup | Test | Boot up the install server or VM and verify connectivity to control network, Management network and switches. Download OPNFV release software. Start the OPNFV installer setup | Test script should run to completion, downloading all necessary packages required and indicate Pass | R1.0 | Yes |
| F-001-02 | PXE Boot of servers | Test | Configure the installer required configuration to identify the servers in the system. Provide the MAC address range and the IP address range for control network, Mgmt Network etc. Start the Installer script to launch the system install. The installer verifies the configuration and PXE boots all servers and makes it ready for the OPNFV upstream software package installation. | 1. All system services are up and running on all nodes. 2. Node connectivity testing, v4 ping, v6 ping of all nodes pass. 3. Necessary admin users are created on all nodes. 4. ssh connectivity works on all nodes and the configured public keys are installed. 5. System logs on all nodes indicate successful installation, no critical errors. 6. Time is synchronized across all nodes. | R1.0 | Yes |
| F-001-03 | Basic Services Install | Test | Proceed with the second phase of installer to setup the basic services required. The Basic services include NTP, Puppet/Juju/XXXX, MySQL etc. | 1. Verify clocks are synchronized on all nodes. 2. Verify MySql Server is up and running. 3. Verify Rabbit MQ is installed and operating correctly. | R1.0 | Yes |
f-001.1415837206.txt.gz · Last modified: 2014/11/13 00:06 by Palani Chinnakannan
Except where otherwise noted, content on this wiki is licensed under the following license: Creative Commons Attribution 4.0 International License
