Differences

This shows you the differences between two versions of the page.

--- storperf:pharos-b [2016/02/10 18:38]
Mark Beierl [Installing Controller Node]
+++ storperf:pharos-b [2016/03/03 17:11] (current)
Mark Beierl [Installing Controller Node]
@@ Line 35: / Line 35: @@
   wget http://artifacts.opnfv.org/fuel/opnfv-2016-02-10_09-45-08.iso
-Network Assignment:
+Set up network bridges:
-As I am not planning on having the two compute nodes be publicly routable over the 10.2.117.0/24 subnet, I am seconding one of the IP addresses from pod9-wcp-node1: 10.2.117.143.  This way we can access FUEL and the FUEL UI directly:
+  export DEV=enp1s0f0
+  export BR=brdmz
+  cp -p /etc/sysconfig/network-scripts/ifcfg-{$DEV,$BR}
+  sed -i -e'/HWADDR/d' -e'/UUID/d' -e"s/$DEV/$BR/" -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-$BR
+  echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo BRIDGE=$BR >> /etc/sysconfig/network-scripts/ifcfg-$DEV
-Inside FUEL master, the following interfaces will be used:
+  export DEV=enp1s0f1
+  export BR=bradmin
+  cp -p /etc/sysconfig/network-scripts/ifcfg-{$DEV,$BR}
+  sed -i -e'/HWADDR/d' -e'/UUID/d' -e"s/$DEV/$BR/" -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-$BR
+  echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo BRIDGE=$BR >> /etc/sysconfig/network-scripts/ifcfg-$DEV
-  Public Subnet           IF0: 10.2.117.0/24
+  export DEV=enp2s0f0
-  FUEL Admin (PXE) Subnet IF1: 10.9.1.0/24
+  export BR=brprivate
+  cp -p /etc/sysconfig/network-scripts/ifcfg-{$DEV,$BR}
+  sed -i -e'/HWADDR/d' -e'/UUID/d' -e"s/$DEV/$BR/" -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-$BR
+  echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo BRIDGE=$BR >> /etc/sysconfig/network-scripts/ifcfg-$DEV
-Set up network bridges:
+  export DEV=enp2s0f0.904
+  export BR=brmanagement.904
+  cp -p /etc/sysconfig/network-scripts/ifcfg-{$DEV,$BR}
+  sed -i -e'/HWADDR/d' -e'/UUID/d' -e"s/$DEV/$BR/" /etc/sysconfig/network-scripts/ifcfg-$BR
+  echo TYPE=Bridge >> /etc/sysconfig/network-scripts/ifcfg-$BR
+  echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo BRIDGE=$BR >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  export DEV=enp2s0f1
+  export BR=brstorage
+  cp -p /etc/sysconfig/network-scripts/ifcfg-{$DEV,$BR}
+  sed -i -e'/HWADDR/d' -e'/UUID/d' -e"s/$DEV/$BR/" -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-$BR
+  echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo BRIDGE=$BR >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  export DEV=enp2s0f1.905
+  export BR=brpublic
+  cp -p /etc/sysconfig/network-scripts/ifcfg-{$DEV,$BR}
+  sed -i -e'/HWADDR/d' -e'/UUID/d' -e"s/$DEV/$BR/" /etc/sysconfig/network-scripts/ifcfg-$BR
+  echo TYPE=Bridge >> /etc/sysconfig/network-scripts/ifcfg-$BR
+  echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-$DEV
+  echo BRIDGE=$BR >> /etc/sysconfig/network-scripts/ifcfg-$DEV
-  cp -p /etc/sysconfig/network-scripts/ifcfg-{enp1s0f0,br0}
-  sed -i -e'/HWADDR/d' -e'/UUID/d' -e's/enp1s0f0/br0/' -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-br0
-  echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f0
-  echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f0
-  echo BRIDGE=br0 >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f0
-  cp -p /etc/sysconfig/network-scripts/ifcfg-{enp1s0f1,br1}
-  sed -i -e'/HWADDR/d' -e'/UUID/d' -e's/enp1s0f1/br1/' -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-br1
-  echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f1
-  echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f1
-  echo BRIDGE=br1 >> /etc/sysconfig/network-scripts/ifcfg-enp1s0f1
-  cp -p /etc/sysconfig/network-scripts/ifcfg-{enp2s0f0,br2}
-  sed -i -e'/HWADDR/d' -e'/UUID/d' -e's/enp2s0f0/br2/' -e's/Ethernet/Bridge/' /etc/sysconfig/network-scripts/ifcfg-br2
-  echo DELAY=0 >> /etc/sysconfig/network-scripts/ifcfg-enp2s0f0
-  echo 'BOOTPROTO="none"' >> /etc/sysconfig/network-scripts/ifcfg-enp2s0f0
-  echo BRIDGE=br2 >> /etc/sysconfig/network-scripts/ifcfg-enp2s0f0
   service network restart
+Network Assignment:
+Inside FUEL master, the following interfaces will be used:
+  Admin (FUEL PXE) Subnet IF1: 10.9.1.0/24
 Create fuel master:
   /usr/bin/qemu-img create -f qcow2 -o preallocation=metadata /var/lib/libvirt/images/fuel-master.qcow2 200G
-  virt-install --name=fuel-master --ram=16384 --vcpus=8 --accelerate --disk path=/var/lib/libvirt/images/fuel-master.qcow2,format=qcow2,bus=virtio --cdrom opnfv-2016-02-10_09-45-08.iso --network bridge=br1,model=virtio --network bridge=br0,model=virtio --os-type=linux --os-variant=rhel6 --vnc
+  virt-install --name=fuel-master --ram=16384 --vcpus=8 --accelerate --disk path=/var/lib/libvirt/images/fuel-master.qcow2,format=qcow2,bus=virtio --cdrom opnfv-2016-02-10_09-45-08.iso --network bridge=bradmin,model=virtio --os-type=linux --os-variant=rhel6 --vnc
-**Note**: The following must be done in the virt-viewer UI.  Also, I cannot seem to assign a default GW to eth0, so I have to put the PXE network as eth0 and the public network as eth1.
+**Note**: The following must be done in the virt-viewer UI.
 Network setup:
-  eth0: 10.9.1.2       netmask 255.255.255.0   no gw
+  eth0: 10.9.1.2       netmask 255.255.255.0   gw 10.9.1.1
-  eth1: 10.2.117.143   netmask 255.255.255.0   gw 10.2.117.1
 ==== Installing Controller Node ====
-The Controller will sit on only two networks:
+The controller and compute nodes are now all bare metal, so nothing further is needed.
+The following was instructions from trying to create a controller VM node.  I never did figure out how to deal with the VLANs inside the VM, so the kind folks at Pharos gave us another bare metal node to act as the controller.
+The Controller will sit on all the bridged networks, except the DMZ:
-  - br1, the POD9 Admin / PXE Boot network
+  - bradmin: PXE
-  - br2, the POD9 Private network.  This is the one that will be shared with the compute nodes.
+  - brmanagement
+  - brprivate
+  - brpublic
+  - brstorage
   /usr/bin/qemu-img create -f qcow2 -o preallocation=metadata /var/lib/libvirt/images/controller.qcow2 200G
-  virt-install --pxe --name=controller --ram=16384 --vcpus=8 --accelerate --disk path=/var/lib/libvirt/images/controller.qcow2,format=qcow2,bus=virtio --network bridge=br1,model=virtio --network bridge=br2,model=virtio --os-type=linux --os-variant=rhel6 --vnc
+  virt-install --pxe --name=controller --ram=16384 --vcpus=8 --accelerate --disk path=/var/lib/libvirt/images/controller.qcow2,format=qcow2,bus=virtio --os-type=linux --os-variant=rhel6 --vnc  --network bridge=bradmin,model=virtio --network bridge=brmanagement,model=virtio --network bridge=brprivate,model=virtio --network bridge=brpublic,model=virtio --network bridge=brstorage,model=virtio
 Once booted, this should show up in the FUEL UI.  Assign it the controller role.

Wiki

User Tools

Site Tools

Differences

Page Tools